Before you buy a machine, you should first study all the technical specifications. If you want things to completely get rid of stains, you should pay attention not only to the CMA functionality, but also to the washing class. The main topic of this article is to find the answer to the question - what class of washing in washing machines is better.
Classification: A to G
What does a washing machine wash class mean? This designation indicates the degree of effectiveness of removing stains and dirt from the laundry. There are such classes:
- AND,
- IN,
- FROM,
- D
- E
- F
- G.
The definition depends on a comparison of the coefficient of the certified machine and the indicator of the reference washing machine. To determine the class of washing efficiency, the developers created a special standard of cleanliness of things. That is, they took a very stained fabric patch, and then washed it in a certified machine, adding 180 g of detergent, setting a reference program with a cycle of 1 hour. In this case, the temperature regime was equal to 60 °. As a result, a result was obtained, with which a comparison was made. Next, a special table was compiled, according to which the machine receives an appropriate rating. The better the washer removes the stained fabric, the higher its effectiveness.
Class | Washing quality | Level of quality |
AND | Fine | 1,3 |
IN | Washes very well | 1-1,3 |
FROM | Good | 0,97-1 |
D | Fine | 0,94-0,97 |
E | Satisfactory quality | 0,91-0,94 |
F | poorly | 0,88-0,91 |
G | Worse than Bad | 0,88-0 |
About Reference AGR
The reference car was released in 1995. Now, standards can be afforded exclusively by authorized manufacturers. Their effectiveness is undeniable. But be careful: in view of the rapid development of modern technology, an ordinary machine can wash much better than a reference. Remember that the standard shows a stable result, and not the best. She simply recorded the lowest variation in performance. That is, 10 out of 10 washes are approximately the same in quality, while not in the reference model for 10 washes 1-2 will be of low efficiency, and the rest with brilliant indicators.
Grade A - Highest Rating
An ideal wash is one in which all dirt, even the most difficult stains, has been removed. Often, models where the class is equal to the value of A. cope with stain removal so efficiently and effectively.
It is believed that class A is significantly different from B. But the difference between them is extremely small. Therefore, if the issue of economy is at stake, take class B.
What is the difference between class A and B? The designation A is the highest mark in the table, since the model went through a better test wash. If the designation B is in the typewriter, then it is a little worse at removing pollution.
Which class is recommended to choose
Most people always ask these questions when shopping for a washing machine. And the answer here is quite logical: it is better to choose a model with a high rate. Washing machines with the designation "A" are considered the most profitable, as they wash laundry, remove dirt and stains, and save energy. And the acquisition of a low-class model will lead to greater energy consumption and low efficiency.
Important! How the machine erases and how much energy it consumes depends on the amount of washing. When the drum is overloaded, the washing quality deteriorates, and the equipment consumes more energy!
We suggest watching a video instruction for choosing a washing machine using the example of the Bosch brand:
You have read comprehensive information about the classes of washing machines. If you decide to please yourself with the purchase of a washing machine, then you will not have problems with the choice, and the letters on the label will be understandable.